LEARN‎ > ‎

Tips, Techniques, and Other Information

These are the top things to check when trying to print from rhino.
  • Is your model closed? With your model chosen type Volume.
    •   If the volume is calculable, then it’s good to go.  Otherwise, you’ll see the message “Some of the objects are not closed.
  • If the Volume is not Calculable then the model is either not closed or it is non manifold. Type Show Edges. Check Naked Edges and Non-Manifold Edges.  In depth walk through.
  • If your model has an interior space. Make sure that the wall thickness is at least a 1/8" thickness.
  • Analyze your model in Netfabb Premium
Additional Links